The Armstrong HumidiClean™ is going to change everything you know about humidifiers.

Ionic beds are made of a fibrous medium, there are five such beds per tank in a HumidiClean humidifier.  They attract solids from the water as its temperature rises - minimizing the buildup of solids on inner tank walls and heating elements.  So you have a  humidifier that stats clean except, of course, for the ionic beds.  And once they have absorbed their capacity of solids, the unit even tells you to change them.  It takes about 15 minutes and is absolutely hassle free.

• HumidiClean Passes No Current Through Water

Totally different compartments keep plumbing completely separated from electrical components.

• Less Scale Means Greater Efficiency

HumidiClean with its remarkable ionic bed technology builds up deposits on its ionic bed inserts instead of tank walls or heating elements.

• Ionic Bed Technology Saves Energy

Because of carbonate buildup, most humidifiers drain every 20-45 minutes.  HumidiClean's ionic beds attract these carbonates from water, so the primary reason to drain the tank is to eliminate sodium.  Since this is typically only necessary approximately once every 24 hours, the unit wastes much less hot water, thereby saving energy dollars.

These microscopic photos show how the ionic bed fibers (magnified 52.5x) collect solids throughout their service life.  A new ionic bed weights approximately 1/3 pound.  When it reaches its capacity, an ionic bed may weigh more than 2 1/2 pounds.  A light on the control panel indicates when to replace HumidiClean's five beds.

• See For Yourself How Much HumidiClean Could Save Over Traditional Units